Maintenance And Cleaning - Renkforce RF-IRDAB-RETRO1 Bedienungsanleitung

You can see the media server from which you want to play music in the list, but you can't find a
folder.
• If a firewall is running on the media server, check if it might be blocking access to the folder. You can briefly disable
your firewall for a quick test.
You cannot enable any folders for file sharing because the function is not displayed:
• Enable the file sharing function on your system.
The radio must buffer the chosen station now and then, which causes playback to stutter.
• The internet radio station is transmitted over a broadband connection. If the bandwidth of your internet connection
is too low or if it is utilised to capacity by another application, there may be breaks.
• Try increasing the buffer time for the cache in the settings menu.
In this case, buffering means that the radio downloads a small part of the stream from the internet and
only starts playback afterwards. This usually ensures that the audio data can be played back without
interruption.
• Check your internet connection and test reception with another station.
Repairs other than those described above must only be carried out by an authorised specialist.

13. Maintenance and Cleaning

Always observe the following safety information before cleaning or servicing the radio:
Live components may be exposed if covers are opened or components are removed. The device must be
disconnected from all power sources before any servicing or repair work is carried out.
Capacitors inside the device may still carry voltage even though they have been disconnected from all
power sources.
Only qualified experts familiar with the hazards involved and the relevant regulations must perform repairs.
Never use any aggressive cleaning agents, cleaning alcohol or other chemical solutions, since these may
damage the casing or even impair function.
• Disconnect the product from the power supply before cleaning it.
• Use a dry, lint-free cloth to clean the product.
65