Renkforce RF-IRDAB-RETRO1 Bedienungsanleitung Seite 62

"Local Radio"
The following settings are possible here:
• Automatic country selection for setting the local stations, which can be selected using the LOCAL button (7).
• Manual country selection for setting the local stations, which can be selected using the LOCAL button (7).
" Playback Setup"
The following settings for the media center playback are possible here:
• Setting up the repeat function when playing music files (all tracks or one track is repeated)
• Random playback order when playing music files
"Resume when Power On"
Here you can specify whether the device is switched on in the last operating state before switching off or starts with
the display of the main menu.
"Dimmer"
The behaviour of the display and the display brightness can be set here.
This menu item can also be selected directly using the DIMMER button (33).
• The mode determines whether the display is dimmed after some time of non-use or not.
• The brightness setting (level) determines the display brightness for dimmed and non-dimmed status.
The display brightness in standby mode can be adjusted manually by turning the rotary knob (5).
"EQ"
• Here you can set sound presets for different types of music.
• With the superior setting, personal settings of the equalizer can be made. Here you can also set the output level
and a 3D effect.
The equalizer settings have little effect on the sound of the built-in speakers, as otherwise it would be very
easy to overload the radio. When connected to an external amplifier or active speaker, the effect of the
equalizer is much stronger.
"Buffer Time"
Buffer time setting for internet radio playback.
When playing back internet radio stations, the data is cached in order to avoid interruptions in the data
connection in the event of a poor data connection or short interruptions. If your Internet reception is poor,
increasing the buffer time can contribute to uninterrupted playback.
62