Handling - Renkforce RF-IRDAB-RETRO1 Bedienungsanleitung

"Information"
Here you can access information about your network and your radio.
This menu item can also be selected directly via the INFO button (26).
"Software Update"
Here you can check for software updates in the network and install them if necessary.
"Reset to default"
Here, you can reset the radio to factory settings.
Attention, all settings will be deleted.

11. Handling

• Never plug the power plug into a mains socket immediately after the device has been taken from a cold to a warm
environment. The resulting condensation may destroy the device. Allow the device to reach room temperature
before connecting it. Wait until the condensation has evaporated.
• Never disconnect mains adapters from the mains socket by pulling at the cable. Always pull it out of the mains
socket holding it by the contact surfaces provided for this purpose.
• Unplug the mains adapter from the mains socket if you do not use the device for some time.
• For safety reasons, disconnect the mains adapter from the mains socket in case of an electrical storm.
• Do not cover the device and mains adapter to ensure sufficient ventilation. Air circulation also must not be impaired
by any objects like magazines, tablecloths, curtains, etc.
63