Renkforce RF-IRDAB-RETRO1 Bedienungsanleitung Seite 55

• Press the rotary knob (5) or the OK button (29) to confirm the selection and receive the station.
• To return to the station list and select another station, press the button (2) or the corresponding arrow button (20).
• To start a new station search, activate the " FM Preset Scan" in the settings menu (see the "Configuration" section)
Calling station information
While a station is playing, you can view more information about that station, the track you are currently playing, or
the time and date.
The information available depends in part on the content broadcast by the station. It may take some time
before all content is available.
• Press the button (3) or the corresponding arrow button (20) on the remote control to display more information.
Each time the button is pressed, one display is shown.
Manage channel list
• Select the station to be edited in the station list.
• Press the button (3) or the corresponding arrow button (20) on the remote control.
• Further options appear in the menu with which the station can be moved or deleted.
Manual station setting
• Press and hold the rotary knob (5) or the OK button (29) until the message TUNING appears in the lower right-hand
corner of the display.
• Set the desired frequency with the (2) or (3) buttons or the corresponding arrow buttons on the remote control.
• When the desired frequency is set, press and hold the rotary knob (5) or OK button (29) to exit the manual station
setting.
55