I) Bluetooth Playback; Playback From An External Audio Device - Renkforce RF-IRDAB-RETRO1 Bedienungsanleitung

i) Bluetooth playback
®
Before transmission between your Bluetooth
This process is called "pairing".
If a pairing to a Bluetooth
within range and Bluetooth
However, this function may have to be activated on your Bluetooth
• Press the MENU button (9) or the
buttons (20) to select "BLUETOOTH".
The "BLUETOOTH" menu item can also be accessed directly by pressing the MODE button (27).
• Press the rotary knob (5) or the OK button (29) to confirm the selection.
• Switch on the Bluetooth
instructions for the corresponding device). The device scans for Bluetooth
• When the radio is found, your Bluetooth
• Select the radio on your Bluetooth
• Start playback on your Bluetooth
• Playback is now via the radio and can be controlled with the
j) Playback from an External Audio Device
The external audio device must be connected to the AUX-IN connection (13) as described above.
• Press the MENU button (9) or the
buttons (20) to select "AUX-in".
The "AUX-in" menu item can also be accessed directly by pressing the MODE button (27).
• Press the rotary knob (5) or the OK button (29) to confirm the selection.
• Start playback at the external audio device.
• The external device is played back via the radio.
58
device and the radio is possible, both devices must be paired together.
®
device already exists, it is automatically restored as soon as both devices are
®
mode is selected on the radio, i.e. "pairing" only needs to be performed once.
®
button (23) on the remote control and use the rotary knob (5) or the arrow
device to which you want to pair the radio and activate the pairing mode (see the
®
device displays its name (RF-IRDAB).
®
device.
®
device.
®
button (23) on the remote control and use the rotary knob (5) or the arrow
device.
®
devices in the reception range.
®
(25), (24) and (32) buttons.