Herunterladen Diese Seite drucken

Hama RCR 110 Bedienungsanleitung Seite 5

Pojektionswecker
Vorschau ausblenden Andere Handbücher für RCR 110:

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
g Operating Instruction
Selecting Temperature / Alarm 1 / Alarm 2 / Dual time Display
- Press MODE will display the ALARM 1 time:
- Press MODE again will display the Alarm 2 time:
- Press MODE again will display the Dual Time:
- Press MODE again will display the Temperature
Indicator
Standing For
Radio Signal
D
Date
Foreign Time
Indication
PM
PM
(12 HR Display only)
AM
AM
(12 HR Display only)
Alarm 1
Alarm 2
- After the batteries are installed, the LCD will turn on and beep for 2 seconds.
The clock will automatically search the radio signal. It takes about 3-5 minutes
to fi nish this process.
- If the radio signal is received, the date & time will be set automatically with
radio control signal icon
turns on.
8
00104952man_de_en_es_fr_nl_pl.indd Abs1:8-Abs1:9
00104952man_de_en_es_fr_nl_pl.indd Abs1:8-Abs1:9
Indicator
Standing For
Radio Signal Weakly
z
Z
Repeat Alarm
Indication
M
Month
Summer Time
Indication
°C
Degree Celsius
°F
Degree Fahrenheit
Dual Time
Dual Time
- If the clock fails to receive the time signal, it will be in Time/Temperature
display with the
icon turns off. Then user can set the time manually.
- Radio-controlled signal will be scheduled to receive every hour.
Manual Time Setting
The system date and time can be set by pressing MODE for 3 seconds in Time/Temperature
display with the
icon turn off.
Setting the Time
- Press MODE again: the year digits are blinking and can be
set by pressing
or
key.
- Press MODE again: the month digits are blinking and can be
set by pressing
or
key.
- Press MODE again: the date digits is blinking and can be
set by pressing
or
key.
- Press MODE: the hour digits are blinking and can be
set by pressing
or
key.
- Press MODE again the minute digits are blinking and can be
set by pressing
or
key.
To install the AC-DC adapter for Continue Projection:
Installation:
Use 2x AA, 1,5 V batteries and AC-DC adapter (included).
Important:
Please make sure your household voltage matched with the voltage
supported by the adapter, or it will damage your clock and adapter.
9
23.02.10 07:35
23.02.10 07:35

Werbung

loading