Powerpeak FHT6704 Bedienungsanleitung Seite 47

STEP 1
1. Attach the Rear stabilizer (39) onto the
Main Frame wit h2 ×M8 Carriage Bolts
(40), Spring Washers (41) and 2× M8 cap
nuts (42)
2. Attach the Front Stabilizer (64)
onto the Main Frame with 2× M8
Carriage Bolts (40), Spring Washers
(41) and 2× M8 cap nuts (42).
STEP 2
1. Screw the right Pedal (28R) into
the right pedal crank . (NOTE: The
screw direction is clockwise).
2. Screw the left Pedal (28L) onto
the left pedal crank (27L). (NOTE:
The screw direction is anti-
clockwise).
3. Then mount the pedal straps left
and right on the associated pedals .
47