Echo RM-510ES Bedienungsanleitung Seite 13

1. Cover (A)
2. Cover (B)
3. Throttle cable
1. Clip
2. Flexible shaft assem-
bly
Loop handle assembly
Shoulder harness
1. Front handle
2. Hanger
4. Engine side
5. Shaft tube side
3. Throttle cable
3. Strap
Before you start
The length of inner cable can be adjusted for proper pulling by
opening cover (B) and resetting flange of throttle cable into a
suitable groove on the left or right.
The 2 pieces of clip attached to flexible shaft assembly must
be set to appropriate positions on the throttle cable (at epual
distance on the whole length of the flexible shaft assembly).
1. Assemble the front handle (A) and bracket (B) on the shaft
tube (C) loosely.
2. Adjust the location of the front handle to a convenient posi-
tion.
3. Tighten the screws (M5×35) (D) and nuts (E) securely. - One
of the 4 screws must be tighten together with the hanger (F)
as illustrated.
1. Suit the length of knapsack band to comfort.
2. As the strap is elastic and adjustable, it is preferable to con-
nect the strap (A) to the hangers (B) located on the front han-
dle (C) and the left or right knapsack band to maintain a
fatigueless and comfortable operation.
11