The Keys - Metrix Mx 407 Bedienungsanleitung

HOLD
O.L
V
Ω
k
M
G
1.1.2 O vers hoot of meas urement c apabilities (O.L )
The O.L (OverLoad) symbol is displayed when the measured signal
exceeds the range limits of the device.
1.2 T he k eys
The keypad has four keys:
1
Figure 3: the keys on the keypad
Locking of the display
Presence of hazardous voltage (>25V)
Test lock function
Compensation for resistance of measurement
leads
Risk of electric shocks in insulation TEST
Overshoot of measurement capacities (§1.1.2)
Volt
Ohm
Prefix, kilo-
Prefix, Mega-
Prefix, giga-
Continuity measurement with buzzer
Low battery indicator
,
2
23
, and
3
.
4