Playing Compact Disc; Getting Started; Mp3 Play - auna KR-400 Bedienungsanleitung

EN
30

PLAYING COMPACT DISC

Getting started

1. Press Function button (15) to select " CD " mode.
2. Push the CD tray open (13) to open the CD tray.
3. Place a CD with the printed side facing up and then close the CD tray.
4. Focus search will performing and the LCD display (1) will show the total
number of tracks. Then, the unit will start to automatically.
5. Press Volume knob (3) to the desired volume level.
Operation
Play / Pause mode: To interrupt, press the " Play/Pause " button (17) once,
"PAUES" will show on the LCD display (1). Press again to resume normal
playback.
If " Stop " button (19) is pressed during play or pause mode, system will go
to stop mode..
Press Skip:  to skip a title forward or backward.

MP3 PLAY

1. After focus search is performing, the total number of track and album
will be shown on the LCD display (1). The unit will start to plat directly.
2. Press " Folder/ Pre-up /down " button(18/20) to select the folder number.
3. Press  or  button (16/21) to select the track number.
ID3/Display-Funktion
Press the " ID3 " button (9) repeatedly, the LCD display (1) show " file during
playback of MP3 file, the song file/album/song/artist name/clock time is
being displayed few seconds in sequence . Then will change back to current
clock time.
Remark:
- In that case of no name or not supportive languages had been assigned
for the track, LCD display will blank (1) when pressing the
ID3 button.
- No Title/Album name can be recognized if the input format on the Disc is
not supporting by the system.
- The system support only English and Arabic number for ID3 function.
MP3 track format requirement:-
- Bit rate : 32 kbps~320kbps, sampling rate : 32khz, 44.1khz and 48 kHz