auna KR-400 Bedienungsanleitung Seite 34

EN
34
Cooking timer
This system had cooking timer function from 1 to 180 minutes to remind your
cooking state by bee tone sound..
1. Press and hold the " Timer " button on the remote control to enter the
timer setting mode, the first digits of display and timer icon  will be
flashing.
2. Press Volume button to adjust the countdown minute. The display will
run up from 1 minute to 180 minutes maximum..
3. Then press " Timer " button to confirm the countdown time.
4. Then press Volume button to adjust the bee tone volume level. Press
the " Timer " button to complete the timer setting. System will start to
countdown automatically and display will change to countdown state.
Once countdown was arrived, bee tone sound will coming.
Notes
• There are about 6 seconds for timer setting mode, this system will
return to normal mode automatically if no keys being pressed in this
time frame.
• You still can enjoy your music during timer countdown. Once
countdown was arrived, the system will generate a bee tome sound
instead of your playing music, just press " Timer " button to switch off
the timer bee tone sound then your music will resume playing.
• You also can disable the timer function anytime by press " Timer "
button until the timer icon  disappears.
Pre-set EQ function
This unit provides 4 differences sound mode to enhance your listening
experience. You can select the desired effect by pressing
the " Preset EQ " button (14) repeatedly at following sequence.
ID3/Display function
Since this system designed with clock/timer feature, thus, the LCD display
will change to clock automatically after operation.
To check your playing mode state(such as CD track nr./ radio frequency)
press " Display/ID3 " button(9) to change the information for displaying few
second.
Aux-in connection
Connect another audio device, e.g. (portable) CD player, MP3 player,
(portable) cassette player, etc. to this system via a audio cord (not supplied).
Connect one end of this cord to the external device and the other end to the
Aux-in jack (12) on the front of the unit.
When connected in this way and select to Aux mode by Function button (15).
It is possible to play back the music already on the connected device.