Internet Radio - auna KR-500 Bedienungsanleitung

EN
28
10. Select the Skip WPS by Up/Down button (8/3) then press Select button
(4) to confirm
11. Enter the password of the router by Up/Down (8/3), Left/Right (19/17)
and Select button (4).
12. Once password entered, select "OK" and press Select button (4)
to confirm, unit will start to connect to the internet and connect
successfully, display will show "Setup wizard completely". Press Select
button (4) to continue.

INTERNET RADIO

1. After above step, unit will enter internet radio mode, press Up/down
button (8/3) to select "Station list" and Select button (4) to confirm.
2. Press Up/down (8/3) to select "Stations" and Select button (4) to
confirm.
3. Press Up/down button (8/3) to select searching mode such as "Location"
or different broadcasting type then press Select button (4) to confirm the
searching mode.
4. For example if "Location" searching mode selected, unit will listed
different area on the display, press Up/down button (8/3) to select and
Select button (4) to select your desired listen location.
5. Then unit will listed the searched broadcasting station on the display,
press Up/down (8/3) and Select button (4) to select your desired
broadcasting station.
6. Press the Volume button (2) to the desired volume level.
Saving a station to a preset memory
You can store up to 10 Internet radio stations in the memory
1. Turn to the desired Internet radio stations method.
2. Press and hold the PRE-UP/DN (17/19) for 3 seconds to start saving.
3. Select a memory space (1-10) by pressing < and >. Press "SELECT" button
(4) to confirm save to select the preset station location.
4. Repeat step 1 to 2 to store other stations.
5. Now you can recall from the preset stations in order by pressing the
PRE-UP/DN (17/19) . Press Up/down button(8/3)to "SELECT" button (4) to
confirm station location.
You can overwrite a present station by storing another Internet radio in its
place.