Klarstein 10032506 Handbuch Seite 30

EN
30
Problems Reasons
The remote The distance between the
control does machine and the remote
not work. control is too far.
The remote control is not
aligned with the direction of
the remote control receiver.
Batteries are dead.
Displays 'E1'. The room temperature sensor is
abnormal.
Displays 'E2' The pipe temperature sensor is
abnormal.
Note: If problems not listed in the table occur or recommended solutions do not work,
please contact the professional service organization.
Solutions
Let the remote control get
close to the air conditioning,
and make sure that the remote
control directly faces to the
direction of the remote control
receiver.
Replace batteries.
Check the room temperature
sensor and related circuitry.
Check the pipe temperature
sensor and related circuitry.