Error Indication - Wilo -IR-Monitor Einbau- Und Betriebsanleitung

ENGLISH
5.4

Error indication

Subject to technical alterations!
22
Description of monitor and pump software is set by WILO prior
to delivery. The data shown here is given as an example.
The dialogue boxes appear when errors or interference occur.
The following messages appear on the display:
y IR communication failure
This message appears when the connection to the pump is
interrupted for a brief period, usually due to the fact that the
monitor is outside the receiver range.
Maintain direction of bearing.
y Function not present
y Too many connections
y No pump selected
y Function not possible in this mode
y Test running
y Pump exchange in operation
y Incorrect password, does not comply with entry
y Battery dead