Wilo -IR-Monitor Einbau- Und Betriebsanleitung Seite 21

ENGLISH
1.1
1.2
1.3
1.4
f f
Close
Displays the type of pump and all current operating data
f Data
Displays the selected settings:
Pump: Ready for operation ON/OFF
Module: Set value set on the pump (manual), PCT
over 0 -10 V
Data: Pump runs in regular (Day) or light load mode
(Night)
Key: Adjustments not permissible for operators,
Yes/No
Ext. OFF: Ext. pump OFF, Yes/No (if terminal present)
Error to
be removed: Yes/No
DP: Master: Ready for operation Locked/Enabled
Slave: Ready for operation Locked/Enabled
Display pump type and set control system:
Pump type: Single / Double (DP)
Control system: Δp-c, Δp-v, Δp-T, n-regulator,
Auto Night: Locked/Enabled (Light load mode)
0 -10 V: Locked/Enabled (Ext. set value, if terminal
present)
DP: Mode: Reserve/Addition
Error display, Error acknowledgement
No error confirmed
Displays the type of error which has occurred
f f
Reset
f
G
f Type of error Error
acknowledged
Automatic start
in x Min
Can be reset
in x Min
17