Troubleshooting; Declaration Of Conformity - Klarstein 10031664 Handbuch

Problem
The operation indicator
light does not light even
though the unit is switched
on.
It comes to a short circuit.
Oil is running out of the
device.
The device can not be
folded over completely.
Producer: Chal-Tec GmbH, Wallstraße 16, 10179 Berlin, Germany.
This product is conform to the following European Directives:
2014/30/EU (EMC)
2014/35/EU (LVD)
2011/65/EU (RoHS)
17

Troubleshooting

Possible Cause
The plug has not been inserted.
The fuse is loose or broken.
The socket is broken.
There are too many devices
connected to the electrical outlet.
The drip tray was not inserted
correctly or incorrectly.
The drip tray is full.
The slider was released during
flipping.

Declaration of Conformity

Solution
Plug the plug into the socket.
Check the fuse in your fuse box and
replace if necessary.
Try a different outlet.
Do not plug the unit into any outlet that
other devices are already connected to.
Insert the drip tray correctly.
Switch the device off, remove the drip
tray and empty it.
Pull the slider all the way to the front and
hold it while you fold the lid completely.
Do not release the slide.