Klarstein 10029825 Handbuch Seite 8

Location
• Install refrigerator in a convenient location away from extreme heat
and cold. Allow sufficient clearance between the refrigerator and side
wall so the door will open without obstruction. Refrigerator is not de-
signed for recessed installation.
• Select a space with strong level floor.
• Allow 2 inches (5cm) of space between the refrigerator' s side & wall
and 4 inches (10cm) between back & the wall.
When the refrigerator is not in use for a prolonged period of time:
Remove the power plug from the power supply.
Remove all contents from the refrigerator.
Dry the interior and leave the door open for a few days.
When you wish to move the refrigerator:
Secure all movable parts and contents. (Package them separately if necessary.)
Transport the refrigerator only in an upright position.
If the refrigerator seems too warm inside:
Check that the door has not been opened too frequently or for a long period.
Check that the interior circulation is not obstructed by having too many goods stored. (The refrigerator is
overloaded)
Did you store anything hot, without first cooling it to room temperature?
Is there sufficient clearance around all sides and above the refrigerator?
If the refrigerator starts making any unusual noises:
Is it wobbling? Re-level it and check if it now operates normally.
Have any objects fallen behind the refrigerator? If so, remove them and check if operation is now normal.
Are any containers inside the refrigerator vibrating or resonating? If so, rearrange them then check to see if
operation has returned to normal.
If the inside light flashes:
Set temperature is higher than inner temperature.
The automatic defrost function starting to work.
Troubleshooting
8