Product Description; Use And Operation - Klarstein 10029825 Handbuch

1 Foot
2 Power cord
3 Door frame
4 Glass door
5 Recessed handle
6 Top door hinge
7 Bottom door hinge
8 Water tray
9 Door liner
19 Door seal
11 Isolated board
12 Cold fan mask
13 Shelf
14 Lamp cover
Before first Use
• Clean the refrigerator thoroughly. Wipe the outside with a soft dry cloth, the interior with a clean moist cloth.
• Insert the power supply cord into the socket.
Tips for Energy Savings
• Try not to open the door too often, especially when the weather is wet and hot. Once you open the door,
close it as soon as possible. Every now and then check if the appliance is sufficiently ventilated.
• Before loading the appliance with packages of fresh foods, make sure they are cooled to ambient tempera-
ture. For hot foods, please cool to room temperature before placing it in the refrigerator.
• Set it on higher temperature can minimize the energy consumption of the household refrigerating appliance
at ordinary temperature.
Operation
When the refrigerator works with full power, the two LEDs on the circuit board will flash. The red one shows the
power input status. The green one shows the output status of the cooling system. Meanwhile the fan inside
the refrigerator begins to work. When the door is opened, the light under the temperature adjustor will turn
on automatically. The temperature range for refrigerator is 8°C to 18°C (lower zone) and 12°C to 18°C (upper
zone). When the temperature is set on one certain point and the temperature inside reaches this point, the
automatic temperature control system begins to work and the cooling system goes into linear temperature
keeping status. Note: Wait 3-5 minutes before restarting if you unplug the refrigerator. The unit may fail to
operate properly if restarted too quickly.
7

Product Description

Use and Operation