Troubleshooting - JVC KD-R482 Bedienungsanleitung

REFERENCES
Change the display information
Each time you press , the display information changes.
• If the information is unavailable or not recorded, "NO TEXT", "NO NAME", or other
information (eg. station name) appears.
Source name Display information
FM or AM Frequency (Date/Clock)
(For FM Radio Data System stations only)
Station name (PS)/Program type (PTY) (Date/Clock)
Clock) Radio text+ (Radio text+)
(Date/Clock) Frequency (Date/Clock)
CD or USB (For CD-DA)
Track title (Artist)
Playing time (Date/Clock)
(For MP3/WMA/WAV/FLAC files)
Song title (Artist)
File name (Folder name)
(Date/Clock) (back to the beginning)
ANDROID When [AUTO MODE] is selected ( 6):
Song title (Artist)
Playing time (Date/Clock)
AUX AUX (Date/Clock)
Available Cyrillic letters
Available characters
Display indications
Radio text (Date/
Song title (Artist) Song title
(back to the beginning)
Track title (Disc title) Track title (Date/Clock)
(back to the beginning)
Song title (Album name) Song title (Date/Clock)
File name (Date/Clock) Playing time
Song title (Album name) Song title (Date/Clock)
(back to the beginning)

TROUBLESHOOTING

Symptom Remedy
Sound cannot be heard. • Adjust the volume to the optimum level.
• Check the cords and connections.
"MISWIRING CHECK Turn the power off, then check to be sure the terminals of
WIRING THEN PWR ON" the speaker wires are insulated properly. Turn the power
appears. on again.
"PROTECTING SEND Send the unit to the nearest service center.
SERVICE" appears.
Source cannot be selected. Check the [SOURCE SELECT] setting. ( 4)
• Radio reception is poor. Connect the antenna firmly.
• Static noise while
listening to the radio.
Disc cannot be ejected. Press and hold
to drop the disc when it is ejected.
"IN DISC" appears. Make sure nothing is blocking the loading slot when you
eject the disc.
"PLEASE EJECT" appears. Press , then insert the disc correctly.
Playback order is not as The playback order is determined by the file name (USB)
intended. or the order in which files were recorded (disc).
Elapsed playing time is not This depends on the recording process earlier.
correct.
"NOT SUPPORT" appears Check whether the track is a playable format. ( 12)
and track skips.
"READING" keeps flashing. • Do not use too many hierarchical levels and folders.
• Reload the disc or reattach the USB device.
"CANNOT PLAY" flashes • Check whether the connected device is compatible with
and/or connected device this unit and ensure the files are in supported formats.
cannot be detected. ( 12)
• Reattach the device.
to forcibly eject the disc. Be careful not
13
ENGLISH