General Instructions On Equipment And Product Damage; Delivery Contents; About This Product - Aventics EV03 Betriebsanleitung

AVENTICS | EV03 | R414008223–BAL–001–AA | English
General safety instructions
W
Observe the regulations for accident prevention and environmental protection.
W
Observe the safety instructions and regulations of the country in which the
product is used or operated.
W
Only use AVENTICS products that are in perfect working order.
W
Follow all the instructions on the product.
W
Only use accessories and spare parts approved by the manufacturer.
W
Comply with the technical data and ambient conditions listed in these operating
instructions.
W
If there is a malfunction, do not attempt unauthorized repairs. Instead, contact
your nearest AVENTICS sales office.
W
You may only commission the product if you have determined that the end
product (such as a machine or system) in which the AVENTICS products are
installed meets the country-specific provisions, safety regulations,
and standards for the specific application.
Safety instructions related to the product and
technology
Danger of burns caused by hot surfaces!
Touching the surfaces of the EV03 during operation could cause burns.
The temperature on uncoated metal can exceed 64 °C and on polymers can
exceed 85 °C.
O Let the device cool off before working on it.
O Do not touch the device during operation.
3 General Instructions on Equipment and
Product Damage
Disconnecting electrical connections while under voltage will destroy the
electronic components of the EV03!
Large differences in potential occur when disconnecting electrical connections
under voltage, which could damage the EV03.
O Make sure the relevant system component is not under voltage before
assembling the EV03 or when connecting and disconnecting it electrically.
EV03 systems contain components sensitive to electrostatic discharge (ESD)!
If the conductive components are touched by persons or objects, this may lead
to an electrostatic discharge that could damage or destroy the EV03.
O Use wrist and shoe grounding straps, if necessary, when working with the EV03.
O Observe the basic rules for ESD.
Loss of the protection class IP65 if the device is opened!
Foreign objects and moisture could penetrate and damage the electronics.
O Never loosen the cap.
O Do not remove the sticker or the name plate.

4 Delivery Contents

W
EV03 pressure regulator
W
Base plate R414007542
W
Operating instructions

5 About This Product

The EV03 pressure regulator is a pneumatic device with integrated electronics
that is only designed to regulate pneumatic pressures.
The electropneumatic pressure regulator controls an output pressure. This pressure
is given as an electrical set point. In doing so, a pressure sensor integrated in the
pressure regulator records the outlet pressure and controls it based on the set point.
As a result, the output pressure specified by the set point is also controlled if there
are disturbance variables, such as flow changes.
EV03 pressure regulators must always be used together with a base plate.
CAUTION
NOTICE
Product identification
O Observe the product information on the base plate or the EV03 pressure
regulator.
1
2
3
4
5
6
7
8
Fig. 1: Name plate for the EV03 pressure regulator
1 QR code
2 Manufacturer
3 Address
4 Mat. no.
5 Production date
6 Serial number
7 Device type
8 Output pressure range
The name plates shown for EV03 pressure regulators are examples.
O Check the material number on the name plate to determine whether the EV03
pressure regulator matches your order.
O If necessary, check that the base plate matches your order using the material
number on the base plate. The material number is located on the top of the base
plate (16). It is only visible if the pressure regulator is disassembled.
16
Fig. 2: Position of the material number on the base plate
O Please see the catalog sheet for your EV03 pressure regulator configuration.
The material short key for the EV03 pressure regulator is structured as follows:
EV03-000-YYY-ZZZ-QQQQ
15 14 13 12
9 Pin assignment (M12 plug)
10 CE mark
11 Safety sign: Hot surface
12 Country of manufacture
13 Internal plant ID
14 Series designation
15 LED designations (only for devices
without display)
13
11
10
9