Maintenance And Cleaning; Maintenance Intervals En - Abicor Binzel iROB Control Betriebsanleitung

iROB Control

9 Maintenance and cleaning

Under normal operating conditions, the remote control does not require maintenance. Scheduled
maintenance and cleaning, however, is a prerequisite for long life and trouble-free operation. Clean the
screen with screen cleaning cloth suitable for LC displays.
Electric shock
Dangerous voltage due to defective cables.
• Check all live cables and connections for proper installation and damage.
• Replace any damaged, deformed or worn parts.
9.1 Maintenance intervals
NOTICE
• The maintenance intervals given are standard values and refer to single-shift operation.
• Maintenance and cleaning work may only be carried out by qualified personnel
Observe the instructions given in EN 60974-4 "Inspection and testing during the operation of arc welding
equipment" and the laws and guidelines valid in the respective country.
Check the following within the intervals given:
• Daily: Visual inspection for damage to the remote control and the cables.
• Yearly: Safety check according to EN 60974-4.
BAL.0333.0 • 2017-08-31
DANGER
(in Germany see TRBS 1203).
9 Maintenance and cleaning
EN - 19