Saving Settings - Abicor Binzel iROB Control Betriebsanleitung

iROB Control

7.6 Saving settings

 Fig. 2 Remote control operating panel on page EN-10
All current settings can be saved and displayed at any time by pressing and holding the <key
do so, enter a name and select a program number.
Press <Softkey 2> (11) to cancel saving at any time.
1 Program number
2
Letter field containing marked letters
Fig. 7 Save settings display
To save power source settings for later applications, proceed as follows:
1 <Keep key
2 On the Save program display, select a program for saving by pressing the <Selector switch> (6). If the
number has already been assigned, the existing program must be deleted, to do so, press the
<Softkey 1> (12) twice.
3 Confirm by pressing <Softkey 3> (10).
4 Assigning a program name: Select a letter by turning the <Selector switch> (6).
5 Confirm the letter by pressing the <Selector switch> (6).
6 Repeat steps 4 and 5 until the program name is complete.
7 Once the name has been assigned, save the program by pressing <Softkey 3> (10).
BAL.0333.0 • 2017-08-31
7
6
4
5
3 Save
4
Cancel
5 Delete letters
> (7) depressed for at least one second.
1
2
3
6 Name of the program
7
Save icon
7 Operation
> (7). To
EN - 15