Timer Setting - Klarstein 10012126 Bedienungsanleitung

EN
22

Timer setting

(1) Select the settings
Press the „TIME SET" button, and the serial number of setting starts blinking
Press the „+" or „-" to change the serial number of the setting. E.g., it is showing the
setting of No.2 .
(2) Select date
Press „TIME SET" button once again, and the cursor on the left side of date starts
blinking Press the „ " or " " keys to move the cursor to the corresponding date, press
the „+" to add the corresponding date, or press „-" to delete the date until you have
completed the selection of all dates
(3) Set the start time
1 Continue to press the „TIME SET" button, the hour starts blinking
2 Press the „+" or „-" to adjust the hour
3 Continue to press the „TIME SET" button, the minute starts blinking
4 Press the „+" or „-" to adjust minute