Timer Settings - Klarstein 10012126 Bedienungsanleitung

The date and time setting
1 Press „DATE TIME" button, then press the „
2 Press „DATE TIME" button again, then press the „+" or „-" to set the hour
3 Press „DATE TIME" button again, then press the „+" or „-" to set the minute
4 Press „OK" button to finish the setting.
Temperature setting
The default temperature setting is 22°C , press „+" or „-" on the remote controller to set
the temperature, which ranges is from 15°C to 30°C.

TIMER SETTINGS

• There are up to 10 kinds of timer setting.
• Each setting has its date, power-on time, shutdown time and temperature setting
• The max. time of each setting is 23 hours 50 minutes
• The setting date for each timer can be any day or more days of a week
• The setting date is the date of power-on time. If the shutdown time is on the second
day, it is unnecessary to set the date, you just set the shutdown time.
View the timer setting
1 Press the „TIME SET" button
2 Press the „+" or „-" to check the power-on time by one by one.
3 For checking the shutdown time, press the „ " button
4 Press the „+" or „-" to continue viewing
5 For deleting the current item of setting, press „C" to delete this setting.
" or „ " key to select the date
EN
21