Troubleshooting; Disposal And Declaration Of Conformity; Environment Concerns - auna 10026466 Handbuch

Certain problems can be solved easily without calling out an engineer. Before conacting your local Service Centre,
please carry out the checks listed underneath.
Problem
No Power
No Sound
No response from the unit
Remote control does not work
Unit powers off after 10 minutes
According to the European waste regulation 2002/96/EG this symbol on the product or on its
packaging indicates that this product may not be treated as household waste. Instead it should
be taken to the appropriate collection point for the recycling of electrical and electronic equip-
ment. By ensuring this product is disposed of correctly, you will help prevent potential negative
consequences for the environment and human health, which could otherwise be caused by
inappropriate waste handling of this product. For more detailled information about recycling of
this product, please contact your local council or your household waste disposial service.
Your product contains batteries covered by the European Directive. 2006/66/EG, which cannot be disposed of
with normal household waste. Please check local rules on separate collection of batteries. The correct disposal of
batteries helps prevent potentially negative consequences on the environment and human health.
Producer: CHAL-TEC GmbH, Wallstraße 16, 10179 Berlin.
This product is conform to the following European Directives:
2014/30/EU (EMC)
2014/35/EU (LVD)
2011/65/EU (RoHS)

Troubleshooting

Possible solution
Ensure the mains plug is connected to a power supply, and is switched
ON.
Make sure there is power to the mains socket.
Make sure if playing from the TV or AUX input, the external source has
the volume turned up and is playing a track.
Make sure the volume is turned up.
If using the digital cable connection ensure the source DIGITAL output
is set to PCM, LPCM, PCM 2Ch stereo or PCM downmix.
BT device not paired. Check 'BT operation'.
Unplug the power cable for 1 minute then plug back in again.
Reduce the distance between the remote and main unit.
Check the batteries are installed correctly.
Replace the batteries.
Aim the remote directly at the Sound bar.
This unit is designed to enter STANDBY mode automatically after 10
MINUTES of inactivity. Press the STANDBY button to wake the unit.

Environment Concerns

Declaration of Conformity
23