Troubleshooting; Environment Concerns; Declaration Of Conformity - auna 10026464 Handbuch

Certain problems can be solved easily without calling out an engineer. Before conacting your local
Service Centre, please carry out the checks listed underneath. If you are unable to identify or solve
the problem, contact your local Service centre. Before telephoning, make a note of the model, serial
number and purchase date of your machine, the Servie Center will require this information.
Problem
No Power
No Sound
No response from the unit
Remote control does not work
According to the European waste regulation 2002/96/EG this symbol on the product
or on its packaging indicates that this product may not be treated as household was-
te. Instead it should be taken to the appropriate collection point for the recycling of
electrical and electronic equipment. by ensuring this product is disposed of correctly,
you will help prevent potential negative consequences for the environment and hu-
man health, which could otherwiese be caused by inappropriate waste handling of
this product. For more detailled information about recycling of this product, please
contact your local council or your household waste disposial service.
Your product contains batteries covered by the European Directive. 2006/66/EC, which cannot be
disposed of with normal household waste. Please check local rules on separate collection of batteries.
The correct disposal of batteries helps prevent potentially negative consequences on the environ-
ment and human health.

Declaration of Conformity

Producer: CHAL-TEC Vertriebs- + Handels GmbH, Wallstraße 16, 10179 Berlin.
This produkt is conform to the followring European Directives:
2014/35/EU (Low voltage)
2014/30/EU (EMC)
2011/65/EG (RoHS)

Troubleshooting

Possible solution
Ensure the mains plug is connected to a power supply, and is
switched ON.
Make sure there is power to the mains socket.
Make sure if playing from the AUX input, the external source has
the volume turned up and is playing a track.
Make sure the volume is turned up.
Unplug the power cable for 1 minute then plug back in again.
Reduce the distance between the remote and main unit.
Check the batteries are installed correctly.
Replace the batteries
Aim the remote directly at the Sound bar

Environment Concerns

17