auna 10026466 Handbuch Seite 18

Connecting a TV, DVD or GAMES CONSOLE
using the RCA - RCA audio cable.
NOTE: Ensure that the TV PHONO connectors are
audio OUTPUTS and not audio INPUTS. If they are
INPUTS then use connection 4 instead of 1.
• Connect one end of the RCA cable to the TV,
DVD or CONSOLE audio output RCA sockets.
• Connect the other end to the TV inputs on the
back of the Sound bar (9).
• Take care to match the RED plug to the RED so-
cket and the WHITE plug to the WHITE socket.
DIGITAL connection to a TV, DVD or Blu-ray player using the COAXIAL cable.
• Connect one end of the RCA COAX cableto the
TV, DVD or Blu-ray COAXIAL audio output RCA
socket.
• Connect the other end to the COAX input on the
back of the Sound bar (10).
• NOTE: You may need to activate PCM (Down-
mix) on your source device EG:- TV, DVD or Blu-
ray player.
DIGITAL connection to a TV, DVD or Blu-ray
player using the OPTICAL cable.
• Connect one end of the OPTICAL cable to the TV, DVD or Blu-ray OPTICAL audio output socket.
• Connect the other end to the OPTC input on the side of the Sound bar (11).
• NOTE: You may need to activate PCM (Downmix) on your source device EG:- TV, DVD or Blu-ray player.
18