auna 10026466 Handbuch Seite 20

Switching inputs (cont)
TV input
Auxilliary input
Coaxial input
BT input
Optical input
USB input
HDMI input
Adjusting the volume level
To increase the volume level press the VOLUME+ button (5 Unit or 23 Remote)
repeatedly or press and hold for fast adjustment. To decrease the volume level
press the VOLUME- button (5 Unit or 23 Remote) repeatedly or press and hold
for fast adjustment.
Sound effect presets
During playback pressing the SOUND EQ button on the remote control (30) re-
peatedly cycles through the available sound modes. Choose between: STAN-
DARD (STD), MOVIE, MUSIC or NEWS. As you select a sound mode the corres-
ponding name appears on the display to indicate that sound mode is active. The
STANDARD sound mode when selected does not show an icon on the display.
Bass enhancement
To increase the bass level press the BASS (B)+ button (27) repeatedly.
To decrease the bass level press the BASS (B)- button (27) repeatedly. NOTE: The
BASS levels range from -3 to +3.
Mute function
Pressing the MUTE button (28) on the remote will temporarily silence the audio
output. You will see 'MUTE' flash on the display to indicate the mute function is
active. Press the MUTE button again to resume the audio output.
Sleep timer
During playback mode, press the SLEEP button (25) to enter the timer settings.
Press the SLEEP button repeatedly to cycle through the available time duration
options of :- 5, 10, 15, 30, 45, 60, 90 minutes & OFF. When you have selected the
required timer duration, just leave all buttons untouched for 2 seconds and the
timer will begin the countdown. When the timer elapses the STANDBY mode
will be activated.
Adjusting the display brightness
Press the DIM. button (26) repeatedly to cycle through the 3 brightness states LOW, MED & HIGH.
TV
AUX
COAX
BT
OPTC
USB
HDMI
20