Operation - Velleman WT33 Bedienungsanleitung

WT33 – DCF-CONTROLLED CLOCK
1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle
could harm the environment.
Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a
specialized company for recycling.
This device should be returned to your distributor or to a local recycling service.
Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for choosing Velleman! Please read the manual thoroughly before bringing this device into service. If the
device was damaged in transit, don't install or use it and contact your dealer.

2. Operation

• Time Setting
In time display, hold SET pressed for 2 seconds to enter the time setting mode. Press SET consequently to
select the language, 12/24h mode, seconds, hours, minutes, year, month and date. Press once more to
confirm. Press UP/CF to modify.
• Alarm Setting
In time display, press MODE to select the alarm display mode. Hold SET pressed for 2 seconds to enter the
alarm setting mode. Press SET consequently to select the hours and minutes. Press once more to confirm.
Press UP/CF to modify. In alarm display, press UP/CF to turn the alarm on or off, press SNOOZE/LIGHT to
turn on the backlight or to set the alarm in snooze mode.