Updating the base station (continued)
8 Click on Select.
9 The page Upload file appears in
the web browser.
10 Select the unpacked software
version and confirm the selection
with open.
11 The Upload file page is closed
and the name of the selected file
is displayed. If you have selected
an incorrect file, an error message
appears. In this case, repeat the pro
cedure again.
12 Click on the Update button in
order to start the system update.
13 A confirmation message appears
on the update process.
14 Follow the update instruc-
tions.
15 Once the system has been suc-
cessfully updated, a confirmation
message appears.
16 The base station system is now
updated.
17 Click on Log out.
18 You have been logged out of the
base station and are now on the Log
in page.
19 Restart the base station
(disconnect power supply for 5
seconds).
20 Wait until the LED at the base
station of the Siedle Scope / Smart
Gateway Mini lights up continuously
in green (approx. 3 minutes).
13