Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Preparing the PC/laptop
LAN connection by an existing
network (router/wireless LAN
router/managed switch/server)
with active DHCP server.
LAN
Router
DHCP = ON
LAN
DECT
SGM 650-...
SZM 851-...
Siedle Scope
S 851-...
Conditions:
• The base station and the PC/
Laptop are ready for use.
• The network is active.
• The base station and the PC/
Laptop are connected to each other
by each network cable on an existing
network (router/wireless LAN router/
managed switch/server).
• The network settings of the base
station are in the default configura
tion (DHCP client enabled).
• The DHCP client is enabled on your
PC/Laptop, to be able to request
a network address from the DHCP
server (router/wireless LAN router/
managed switch/server).
10
Remarks:
• In the delivery status, the base
station is delivered with an active
DHCP client and requests a net
work address from the DHCP server
(router/wireless LAN router/managed
switch/server), whenever a network
connection is available.
• The IP address of the base sta
tion can be received either from
the scope handset (Main Menu >
Settings > Status > IP base station)
or by the router/wireless LAN router/
managed switch/server in the reg
ister Network/Network settings. You
will find there the designation of the
base station s851_D4E32Cxxxxxx
(e.g. s851_D4E32C0000C1).
Procedure:
1 Connect the base station via a
network cable to the existing net-
work (router / wireless LAN router /
managed switch / server).
2 Connect the PC/Laptop via a net
work cable to the existing network
(router / wireless LAN router /
managed switch / server).
3 Determine the network address
of the base station by the existing
network or with the scope handset.
4 Open the Firefox web browser
and enter the determined IP
address of the base station
(e.g. 192.168.178.2).
5 The registration page opens.
Availability of the base station:
The base station is available
under the assigned IP address
from the DHCP server IP (e.g.
192.168.178.xxx).
Werbung
