Werbung
Verfügbare Sprachen
Verfügbare Sprachen
GB
OPENING THE BOOSTER SEAT
1
First press both side buttons fully to release.
2
Lift the tray upwards.
3
Open the legs fully and the backrest, then raise the tray until you hear a click.
4
Push the front corners of the seat downwards into place until they click into place. (See
locking symbol)
SAFETY GUARANTEE
5
Position the booster seat in the middle of a stable chair making sure it does not hang over
the sides of the chair (see the warnings in this manual).
6
So that the booster seat is horizontal, turn the feet of the base before fitting the fastening
straps.
7
Fit the lower fastening strap on one side of the booster seat, pass it under the chair and
then fit it again on the opposite side of the booster seat.
8
Tighten the strap on both sides of the booster seat to make sure it is securely fastened.
9
Unfasten the safety strap of the backrest of the booster seat, pass it around the backrest
of the chair and fasten the buckle, tighten the strap until it holds the seat firmly in place.
10
Unfasten the harness buckles, place the child on the booster seat, this is easier to do with-
out the tray. Then fasten the harness and tighten the straps appropriately.
DETACHING THE TRAY
11
Remove the tray by pressing both buttons on the underside of the tray and lift it upwards.
12
Follow this procedure in reverse order until you hear and feel it click into place.
FOLDING THE BOOSTER SEAT
13
Release the front part of the seat.
14
Press the two side buttons fully inwards.
15
Bring the legs and the backrest together, then fold the tray, and lastly, release the but-
tons.
CLEANING
The booster seat can be cleaned with a damp cloth.
13
Werbung
