Interfacing; General; Balanced Input With Phantom Power - AKG C 451B Bedienungsanleitung

3.1 General

Refer to sections
3.2 and 3.3.
3.2 Balanced Input
with Phantom Power
Refer to fig. 1 below.
C 451B
C 451B
16

3 Interfacing

The C 451B is a condenser microphone and therefore needs a
power supply.
The microphone provides a balanced output on a 3-pin male
XLR connector:
Pin 1: ground
Pin 2: hot
Pin 3: return
• You can connect the microphone to balanced microphone
inputs with or without phantom power. AKG phantom power
supplies allow you to connect the microphone to unbal-
anced inputs as well.
1. Use an XLR cable to connect the microphone to a balanced
XLR input with phantom power.
2. Switch the phantom power on. (Refer to the instruction
manual of the unit to which you connected your C 451B.)
3.2
B 18
3.3
Fig. 1: Connecting to a balanced input.
C 451 B