Inhaltsverzeichnis; Specifications - Hach CD500 Bedienungsanleitung

Table of contents
Specifications on page 3
General information on page 4
Installation on page 7
User interface and navigation
Startup on page 17
Legal information
Manufacturer: TriOS Mess- und Datentechnik GmbH
Distributor: Hach Lange GmbH
The translation of the manual is approved by the manufacturer.

Specifications

Specifications are subject to change without notice.
Specification
Dimensions (W x D x H)
Weight
Enclosure
Operating temperature
Storage temperature
Relative humidity
Power requirements
Power consumption
Measurement
Memory
Communications
Communications protocol Modbus RTU: RTU server, RTU client, configurable parameters (default: 9600-8-N-1)
Network connection
USB port
Relays
Outputs
Input/output switch
Cleaning
Compliance information
Warranty
on page 16
Details
280 × 94 × 170 mm (11 × 3.7 × 6.7 in.)
3.7 kg (8.16 lb)
IP66 die-cast aluminium alloy housing; Front panel: acrylic glass (PMMA)
0 to 40 °C (-4 to 140 °F)
-20 to 70 °C (-4 to 158 °F)
0 to 95%, non-condensing
85-265 VAC, 50/60 Hz; 12-24 VDC ± 5%
6 W (50 W maximum)
Four M12 connectors for optical sensors
Internal 2 GB Micro SD card
RS232, RS485
Modbus TCP: TCP server, configurable TCP port (default: 502)
Ethernet, RJ-45 connector, protocol: TCP/IP, Modbus TCP, VNC
USB 2.0 (Host), USB-A socket for data download
One relay (SPDT), 250 VAC, 2 A; Wire gauge: 2.5 mm
Six 4-20 mA configurable analog outputs; Load: 500 Ω maximum; Error indicator:
0 mA; Wire gauge: 1.5 mm
Measurement trigger: Trigger for global measurement (electrically isolated); Control
voltage: 12-24 VDC (± 5%); Wire gauge: 1.5 mm
Control voltage: no
Integrated compressed air valve for cleaning
CE mark
1 year (EU: 2 years)
Operation on page 18
Maintenance on page 20
Troubleshooting on page 20
Accessories on page 21
2
(16 AWG) maximum
2
(16 AWG) maximum
2
(14 AWG) maximum
English 3