Other Standards; Extended Order Code - Endress+Hauser Micropilot FMR62 Bedienungsanleitung

Micropilot FMR60, FMR62, FMR67

Other standards

Extended order code

Endress+Hauser
Among other things, the following standards shall be observed for proper installation:
• IEC/EN 60079-14 : 2012: "Explosive atmospheres - Part 14: Electrical installations design,
selection and erection"
• EN 1127-1 : 2011: "Explosive atmospheres - Explosion prevention and protection - Part 1:
Basic concepts and methodology"
The extended order code is indicated on the nameplate, which is affixed to the device in such a way
that it is clearly visible. Additional information about the nameplate is provided in the associated
Operating Instructions.
Structure of the extended order code
FMR6x –
(Device type)
* = Placeholder
At this position, an option (number or letter) selected from the specification is displayed
instead of the placeholders.
Basic specifications
The features that are absolutely essential for the device (mandatory features) are specified in the
basic specifications. The number of positions depends on the number of features available.
The selected option of a feature can consist of several positions.
Optional specifications
The optional specifications describe additional features for the device (optional features).
The number of positions depends on the number of features available. The features have a 2-digit
structure to aid identification (e.g. JA). The first digit (ID) stands for the feature group and consists
of a number or a letter (e.g. J = Test, Certificate). The second digit constitutes the value that stands
for the feature within the group (e.g. A = 3.1 material (wetted parts), inspection certificate).
More detailed information about the device is provided in the following tables. These tables describe
the individual positions and IDs in the extended order code which are relevant to hazardous
locations.
*************
(Basic specifications)
XA01551F-A
+ A*B*C*D*E*F*G*..
(Optional specifications)
21