Before Using The Appliance The First Time; Operation - Unold 8250 Bedienungsanleitung

BEFORE USING THE APPLIANCE THE FIRST TIME

1. Remove all packaging materials and transport safeguards. Keep packaging
materials away from children– danger of suffocation!.
2. Clean all parts with a damp cloth, as described in the chapter "Cleaning
and care".
3. Check to make sure that the appliance is stable.
4. Connect the base via the power cord to the power supply (230 V~, 50 Hz).
5. Remove the kettle from the base.
6. Press the opening key to the back, the lid is opening.
7. Add clear, cold water to the "Max" marking.
8. Close the lid by pressing lightly.
9. Place the kettle level on the base.
10. Switch on the kettle by pressing the ON/OFF switch downwards into the
„I"-position. The kettle cannot be switched on if it is not properly seated
on the base.
11. When the water boils, the appliance automatically shuts off.
12. For hygienic reasons, please discard the water from the first boiling.

OPERATION

1. Remove the kettle from the base.
2. Press the opening key to the back, the lid is opening.
3. Fill the kettle with water (minimum 0.5 litres, mark MIN, maximum
1.8 litres, mark MAX).
4. CAUTION!
If the kettle is overfilled, boiling water may be ejected!
5. Close the lid until it clicks into place. The locking prevents accidental open-
ing.
6. Place the kettle level on the base in order to establish the contact with the
power connection.
7. Switch on the kettle by pressing the ON/OFF switch downwards into the
„I"-position. The kettle cannot be switched on if it is not properly seated
on the base.
8. Whenever you take the kettle off the base, the appliance is automatically
switched off, even if the water is not yet boiling.
20
Copyright UNOLD AG | www.unold.de