Bi-Wire Connection - Yamaha NS-F160 Bedienungsanleitung

Bi-wire connection

■ About bi-wire connection
This speaker system is capable of bi-wire connection. To connect the speaker to the output terminals of the
amplifier (or receiver), two pairs of cables for each of mid-range/woofer and tweeter used instead of standard
connections.
This type of connection decreases the modulation distortion caused by electric resistance of the cables and driving
current of the speakers.
Consequently, purer sound quality can be expected.
To utilize bi-wire connection, remove the short bars from the terminals first, and then connect the mid-
range/woofer and tweeter to the amplifier separately using two pairs of cables.
If necessary, use a commercially available speaker cable to connect the speaker system.
Tweeter terminals
Black (–)
Short bar
Mid-range/woofer
terminals
1
NS-F160 (R)
SPEAKERS
R
+ –
Amplifier or
Receiver
Red (+)
NS-F160 (L)
L
– +
Remove the short bars before connecting.
When your amplifier has only one set of
speaker output terminals.
☞ 1
When your amplifier has two sets of
speaker output terminals.
☞ 2
2
NS-F160 (R)
SPEAKERS
R
L
+ – –
Amplifier or
Receiver
A B
Both SPEAKERS and should be connected.
NS-F160 (L)
A
+
B
3
En