Intended Use; Technical Description; Using The Refrigerator; Energy Saving Tips - Waeco CoolMatic HDC-160 Bedienungsanleitung

HDC-160, HDC-190, HDC-220
4

Intended use

The refrigerator is suitable for cooling and freezing foodstuffs.
The device is also suitable for use on boats.
If you wish to cool medicines, please check if the cooling capacity
of the device is suitable for the medicine in question.
5

Technical description

The refrigerator is suitable for use with a 12 V or 24 V DC voltage and can
therefore also be used for camping or on boats. It can also be connected to
a 230 V mains supply via the MOBITRONIC MPS-50 rectifier.
When used on boats the refrigerator can be subjected to a constant
inclination of 30°.
It can cool products to +10 °C to +2 °C and keep them cold. In the freezer
compartment, it can cool products to –18 °C and freeze them.
All materials used in the refrigerator are compatible for use with foodstuffs.
The refrigerant circuit is maintenance-free and CFC-free.
You can use the variable thermostat to set the desired temperature.
6

Using the refrigerator

Before starting your new refrigerator for the first time, you should
clean it inside and outside with a damp cloth for hygienic reasons
(please also refer to the "Cleaning and maintenance" chapter on
page 29).
6.1

Energy saving tips

Choose a well ventilated installation location which is protected against
direct sunlight.
Allow food to cool down first before placing it in the device.
Do not open the refrigerator more often than necessary.
Do not leave the door open for longer than necessary.
Defrost your refrigerator as soon as a layer of ice forms.
Avoid unnecessarily low temperatures.
Clean the condensor of dust and impurities at regular intervals.
Intended use
23