Cleaning And Care - Klarstein 10029327 Anleitung

Remote Control
The remote control requires CR2032 size Batteries.
Open the battery compartment by sliding the cover
down and insert the batteries noting the polarity indi-
cated in the battery compartment.
Remote control operations are identical to the func-
tions on the control panel. Point the remote towards
the unit and depress the appropriate button. The re-
mote control will operate up to 6 metres from the
unit.
• Switch off and unplug from the power supply, then pull out the water tank according to instruction to clean
the product. When cleaning the water tank, first drain the water inside then remove any dirt and dust and
wipe dry.
• Using a soft, damp cloth, carefully clean the exterior surface of the product.
• Do not allow water or other liquids to run into the interior of the product, as this could create a fire and/or
electrical hazard.
• We also recommend the periodic cleaning of this appliance by lightly running a vacuum cleaner nozzle over
the guards to remove any dust or dirt that may have accumulated inside or on the unit.
• Do not use harsh detergents, chemical cleaners or solvents as they may damage the surface finish of the
plastic components.
Filter Cleaning
The filter is supplied assembled and can be removed for
cleaning as required. It is recommended that the filter be
cleaned once every week.
1. Take off the dust filter, turn the water filter lock:
2. Clean the dust filter with abstergent or soft brush.
3. Dip the water filter into detergent water and dry it.

Cleaning and Care

12