Axis P5512 Bedienungsanleitung Seite 20

Page 20
Unit Connectors
Network connector – RJ-45 Ethernet connector. Supports PoE (Power over Ethernet, IEEE 802.3af
Class 3). Shielded cables should be used to comply with EMC.
Multi-connector - See Multi-connector cable (sold separately), on page 21 – Terminal connector
for connection of external equipment:
• Audio equipment
• Input/output (I/O) devices
• AC/DC power supply
When connecting external equipment to AXIS P5512, a multi-connector cable is required in order
to maintain the IP51 rating. The multi-connector cable can be purchased from your Axis reseller.
For more information, please see the User's Manual available from the AXIS Network Video Product
CD supplied with this product or from the website at www.axis.com
SDHC card slot – A standard or high capacity SD card (not included) is required to store images
locally in the network camera. To insert and remove the SD card, the camera's top cover must be
removed, see Install an SD card (optional), on page 9.
Note:
Before removal, the SD card should be unmounted to prevent corruption of recordings. To
unmount the SD card, go to Setup > System Options > Storage > SD Card and click
Unmount. For more information, please see the User's Manual available from the AXIS Net-
work Video Product CD supplied with this product or from the website at www.axis.com
AXIS P5512 Installation Guide