End Of Operation; Troubleshooting - Medion MD 17495 Bedienungsanleitung

11. End of operation

When the cooking process is finished and the time appears on the display, open the
door and remove the food. The device switches itself off automatically when cook-
ing is finished.
If you do not plan to use the device for a long period of time, disconnect the mains
plug and store the device in a dry location.

12. Troubleshooting

PROBLEM
The device will not start
The device will not start
The device does not
warm up.
The rotary plate makes
noises
80 of 170
Possible cause
The mains plug is not
properly inserted.
The fuse is blown or the
power interrupter has
tripped.
The socket is defective.
The door is not closed.
Dirty rollers
Rotary plate incorrectly
inserted.
Solution
Disconnect the plug,
wait 10 seconds and
then plug it back in
again.
Replace the fuse or reset
the interruption to the
power supply (only con-
tact our service depart-
ment).
Check the socket by con-
necting another device.
Close the door.
Clean the rotary plate
Correctly insert the rota-
ry plate.