Electrical Installation - Ascaso I.1 Bedienungsanleitung

ascaso
3. Installation / Operation
The technician in charge of installation
must carefully read this manual before
operation of the machine, which must
be carried out by qualified staff, yet
respecting safety regulations in force.
The grinder must be installed in a flat
and stable surface, at a height which
makes operation of the machine
comfortable and safe, as close as
possible to the coffee machine.
The machine operator must be a
responsible adult person.
Hopper assembly (I.1/I.1D)
Remove the screw
regulating collar
ensuring the holes are lined up, and
replace the screw.

Electrical installation

Before connecting the grinder to the
mains, be sure of checking that the
grinder specifications correspond with
those of the power supply.
It is not recommended to use cord
extensions nor multiple connectors.
14
from the
14
, insert the hopper
15
I.1 / I.2 / steel / i·mini /
i·steel machine Models
operation
Assemble the coffee bean hopper
on its position.
Fill it with coffee beans in such an
amount as to be consumed on a daily
basis. Put the hopper lid
position.
Connect the power cord
mains.
Push the ON-OFF switch
the machine on. The built-in led will
be on. The grinder will then be ready
for grinding.
Only models with a timer device (NO
USA), allows the operator to adjust
in advance the grinding time (a min-
imum of 8 seconds and a maximum
of 60 seconds) by using regulator
. Every time ground coffee is required,
the machine filter holder must be
placed under the coffee spout
guided by the switch holder fork
pressing the switch
Turning the timer regulator
clockwise will result in an increase
of grinding time, whereas turning it
counterclockwise decreases grinding
time.(FIG.1)
3
on its
2
to the
7
to turn
1
6
and
8
,
9
.
10
6