Reset To Factory Default Settings - Axis M1124-E Installationsanleitung

AXIS M11-E Network Camera Series
The product can be used with most operating systems and browsers. The recommended browsers are
• Internet Explorer
®
• Safari with OS X
TM
• Chrome or Firefox
For more information about using the product, see the User Manual available at www.axis.com
Adjust Focus and Zoom
1. If necessary, remove the top cover of the housing.
2. Loosen the lock screw for the focus ring.
3. Adjust the focus and zoom by navigating to Setup > Focus on the product's web page.
Follow the instructions in the online help.
4. Re-tighten the lock screw for the focus ring.
1 Zoom puller
2
Lock screw
3
Focus ring
4
Lens
Note
After adjusting zoom and focus, if optimal corner focus is not achieved, rotate the entire
lens to the factory-set position shown in the illustration above. Then slightly rotate the
lens clockwise or counter-clockwise to reach focus in all corners.
5. Attach the top cover of the housing.

Reset to Factory Default Settings

Important
Reset to factory default should be used with caution. A reset to factory default will reset
all settings, including the IP address, to the factory default values.
® ®
with Windows
®
and
®
with other operating systems.
22