Specifications; Operating Conditions; Power Consumption - Axis M1124-E Installationsanleitung

Specifications

Operating Conditions

Product
AXIS M1124–E
AXIS M1125–E

Power Consumption

NO TICE TICE
NO NO TICE
Use a limited power source (LPS) with either a rated output power limited to ≤100 W
or a rated output current limited to ≤5 A.
Product DC
AXIS M1124–E 8–28 V DC
AXIS M1125–E
Cable Area
NO TICE TICE
NO NO TICE
• Use cables that keep within the specified cable area.
• Select cables in compliance with your local regulations.
• Make sure all cable holes are properly sealed.
• Use cable gaskets or cable glands that match both the cable hole and the cable area.
Diameter
From 5 to 15 mm (0.197 to 0.591 in)
To create extra cable holes, open the drill-outs located in the bottom of the housing. See Hardware
Overview on page 8.
For information about accessories, such as cable gaskets and cable glands that allow for other
cable areas, see www.axis.com
AXIS M11-E Network Camera Series
Classification
IEC 60721-3-4 Class 3M4,
Class 4M4
IEC/EN 60529 IP66
NEMA 250 Type 4X
13
Temperature
–20 °C to 50 °C
(–4 °F to 122 °F)
PoE
Power over Ethernet IEEE
802.3af Class 2
AWG
Approximately from 4 to 6/0
Humidity
10-100% RH
(condensing)