Axis M1124-E Installationsanleitung Seite 19

3. Push the network cable through the cable gasket.
4. Pull the network cable back slightly so that the cable gasket adjusts itself on the cable.
NO TICE NO NO TICE TICE
Not pulling the cable back could cause water to seep in and damage the product.
5. Make sure that the cable gasket is fitted properly.
6. Connect the network cable to the network connector.
7. If connecting a power cable or an I/O device to the camera, repeat the steps above as
applicable to the specific device.
AXIS M11-E Network Camera Series
19