JVC KW-V215DBT Bedienungsanleitung Seite 44

SETTINGS SETTINGS
<System> setting screen
<Language>
Select the text language used for on-screen
information.
• English (Initial )/Español/Français/Deutsch/
Italiano/Nederlands /Português/Türkçe /
ccĸ / / / /
/Bahasa Malaysia/Bahasa Indonesia
– "Please Power Off" appears when the setting is
changed. Turn off the power, then turn on to
enable the change.
• GUI Language: Select a language used for
displaying operation buttons and menu items.
– English (Initial)/Local (the language selected
above)
<Clock>
Adjust the clock time. (Page 4 )
<Beep>
• ON (Initial): Activates the key-touch tone.
• OFF: Cancels.
<SETUP Memory>
You can memorize, recall, or clear the settings you
have made. (Page 40)
<Touch Panel Adjust>
Adjust the touch position of the buttons on the
screen. (Page 41)
44
<Bluetooth Setup>*
Configure settings for using a Bluetooth device, such
as connection and other general operations.
• Paired Device List: Press [Enter] to show the list
of registered devices. You can connect the device
or delete the registration. (Page 30)
• PIN Code: Changes the PIN code of the unit.
/ /
(Page 29)
• Device Name: Shows the device name to be
shown on the Bluetooth device—JVC KW-V .
• Device Address: Shows the device address of the
unit.
• Auto Connect:
– ON (Initial): The connection is automatically
established with the last connected Bluetooth
device when the unit is turned on.
– OFF: Cancels.
• Bluetooth HF/Audio: Select the speakers used for
Bluetooth (both phone and audio player).
– Front Only: From front speakers only.
– All (Initial): From all speakers.
• Auto Pairing:
– ON (initial): Establishes pairing automatically
with the connected iOS device (such as iPhone)
even if the Bluetooth function is deactivated on
the device. (Auto pairing may not work for some
devices depending on the iOS version.)
– OFF: Cancels.
• Initialize: Hold [Enter] to initialize all settings you
have made for using Bluetooth mobile phone and
Bluetooth audio player.
1
<DAB Setup>*
2
• L-Band Tuning:
– ON: Receives the L-Band width during Digital
Audio reception.
– OFF (initial): Cancels
• Antenna Power:
– ON (initial): Supplies the power to the DAB
aerial.
– OFF: Cancels
<Initialize>
Initialize all settings you have made. Hold [Enter] to
initialize the settings.
• After initializing the settings, adjust the settings
on the <Initial Settings> screen.
<DivX® VOD>
This unit has its own Registration Code. Once you
have played back a file with the Registration Code
recorded, this unit's Registration Code is overwritten
for copyright protection.
• Press [Enter] to display the information.
• To return to the previous screen, press [OK].
<System Information>
Displays the version information of the software.
You can update the software. (Page 41)
* Only for KW-V41BT/KW-V215DBT/KW-V21BT.
1
* Only for KW-V215DBT.
2