JVC KW-V215DBT Bedienungsanleitung Seite 22

TUNER TUNER
News Standby Reception
1
2
The unit is in standby to switch to News
Program if available. (The NEWS indicator lights
up.)
• If the NEWS indicator flashes, tune into
another station providing Radio Data System
signals.
To deactivate News Standby Reception:
Select [OFF] for <NEWS Standby>. (The NEWS
indicator turns off.)
• The volume adjustment while receiving News
is automatically memorized. The next time the
unit switches to News, the volume is set to the
previous level.
22
Tracing the same program—Network-
Tracking Reception
When driving in an area where FM reception is not
sufficient enough, this unit automatically tunes in to
another FM Radio Data System station of the same
network, possibly broadcasting the same program
with stronger signals.
• When shipped from the factory, Network-Tracking
Reception is activated.
To change the Network-Tracking Reception
setting
1
2
[AF] Switch to another station. The
program may differ from the one
currently received (the AF indicator
lights up).
[AF Reg] Switch to another station
broadcasting the same program (the
AF indicator lights up).
[OFF] Deactivate the function.
• The RDS indicator lights up when the
Network-Tracking Reception is activated and
an FM Radio Data System station is found.
Automatic station selection—Program
Search
Usually when you select preset stations, the preset
station is tuned in.
If the signals from the preset FM Radio Data System
station are not sufficient for good reception, this
unit, using the AF data, tunes in to another station
broadcasting the same program that the original
preset station is broadcasting.
To activate Program Search
1
2
• The unit takes some time to tune in to another
station using program search.
To deactivate Program Search: Select [OFF] for
<Program Search>.