JVC KW-V215DBT Bedienungsanleitung Seite 31

BLUETOOTH BLUETOOTH
Adjusting the volume of calls/earpiece/
microphone
While talking...
• You can adjust the volume level between –20 to
+8 (initial: 0).
• Use the monitor panel to adjust the call/earpiece
volume. (Page 7 )
Switching between handsfree mode
and phone mode
While talking...
Each time you press the button, the talking method
is switched ( : handsfree mode /
mode).
Notification when SMS is received
If the mobile phone is compatible with SMS (Short
Message Service), the unit tells you a message has
been received when <SMS Notify> is set to [ON].
(Page 35)
• To read a received message, operate the mobile
phone after stopping the car in a safe place.
– You cannot read, edit, or send a message
through the unit.
• For some mobile phones, the notification message
may not be shown even if the SMS function is
supported.
Reducing noise/adjusting the echo
cancel level
While talking...
Activate the noise reduction/echo cancel function
(1), then adjust the level (2).
• To adjust the echo volume (between 1 to 10,
initial: 4): Adjust <EC LEVEL>.
: phone • To adjust the noise reduction volume (between
−5 to −20, initial: −7) : Adjust <NR LEVEL>.
Making a call
1
Display the <Hands Free> screen.
On the Home screen:
• You can also display the <Hands Free> screen
by pressing / on the monitor panel.
2
Select a method to make a call.
1 2 3 4
1 From the phone book/call lists
2 Direct number entry
3 Voice dialing
4 Preset list
• To preset, see page 33.
ENGLISH 31