Firing Curves - Pyrotec PY1 Bedienungsanleitung

Firing Curves

The PYROTEC PY1 microprocessor controller allows an
exact and reproducible control of your kiln. A firing curve
consists of the segments (a) to (d).
Example:
heating up to 1st temperature (a):
The kiln heats up at the set rate. Rate is entered by the
time to reach the temperature (600°C in the example).
heating up to final (firing) temperature (b):
Kiln heats up at maximum power to firing temperature.
dwell at final temperature (c):
The kiln temperature remains at the final temperature
for the set time. This is to ensure that all fired goods are
entirely heated through.
program end resp. uncontrolled cooling (d):
After completing dwell the kiln cools down naturally
17