Troubleshooting - Barista CM5013B-GS Anleitung

EN
Descaling
Limescale deposits have an adverse effect not only on the quality of the coffee and the
water, but they also cause power losses and shorten the lifespan of the device. The
thicker a limescale layer is, the more diffi cult it is to remove.
We therefore recommend regularly removing limescale deposits with a descaling agent
in accordance with the water quality in your area and how often the device is used (ap-
prox. every 2 – 6 weeks).
To do this, following the instructions for use on the descaling agent.
Storage
Disconnect the device from the mains power when it is not going to be used for a pro-
longed period. Clean the device again if necessary (see the "Care and Storage" chapter)
and let it dry completely.
Store the device and all accessories in a dry, clean, frost-free place that is protected from
direct sunlight and cannot be accessed by children or animals.

Troubleshooting

If the device does not work properly, check whether you are able to rectify the problem
yourself. If the problem cannot be solved with the steps that are listed, contact the cus-
tomer service department.
Do not attempt to repair an electrical device yourself!
Problem
The device cannot
be switched
on. / The operating
lamp does not
light up.
The fuse in
the fuse box is
triggered.
28
Possible cause
The mains plug is not in-
serted correctly in the plug
socket.
The plug socket is defective.
No mains voltage is present.
The On / Off switch (10)
has not been pressed.
Too many devices connected
to the same circuit.
Fix
Insert the mains plug.
Try another plug socket.
Check the fuse of the mains
connection.
Press the On / Off switch
to switch on the device.
Reduce the number of de-
vices in the circuit.